General Lighting Electronics Co. Ltd

Model Number: GLT-AB12--32-#9633 Brand Name: General Lighting Key Specifications/Special Features: LED Emergency light,CE/RoHS/TUV approved T10 LED Tube LightFeatures:Applicable for both emergency lighting and normal lightingHigh-brightness 3014SMD LED, high-efficiency and eco-friendlyAnti-corrosion aluminum housingHighlight PC cover

With normal utility power supply, be used as normal tube and can be switched-on and off

When there is a power failure, the emergency function begins to work

The lasting emergency time is around 180 ±20 minutes

Built-in lithium battery, the battery will still remain 80% original capacitance after 500 times, charging and discharging

Safe and long lifespan

Specifications:

• LED: 3014 SMD
• LED quantity: 192 pieces
• Input voltage: 100-240V AC
• Rated frequency range: 47-63Hz
• Normal lighting power: 18 ±1W
• Battery charging power: 4.2 ±1W
• Power factor: >0.9
• Lumen: 1,600 ±100lm
• Lumen as emergency lighting: 500 ±50lm
• CCT range: 5,700-6,500K
• Charging time: 8 hours
• Back-up time: 3 hours
• CRI: >80Ra
• Material: anti-corrosion aluminum
• Size: 1,198 x 30mm
• Net weight: 478g

Note:

• Connect L to the AC L power line
• The L line will power the battery and detect power disruption
• When there is a power failure, the emergency lighting module will begin to work
• L-SW connects to AC L power line by on/off switch and it controls on/off switch of normal lighting
• AC N is connected to the null line
• Please make sure to connect the emergency tube according to the above diagram, otherwise failure in emergency function may be incurred or light may stay on at 100%
• With normal utility power supply, the tube works in the same way as other standard tubes and goes on/off
• When utility power fails, the tube will bypass on/off wall switch and turn on automatically at 30% brightness
• Light output in emergency mode reaches 30% of its original lumen, lasting for over 180 minutes